Compaq 270680-003 Compaq Reference Guide Deskpro 4000 and Deskpro 6000 Series - Page 44
Installing the Cable Lock Provision, between the narrow bracket and the computer.
View all Compaq 270680-003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installing the Cable Lock Provision The cable lock provision consists of a three-piece security bracket. The bottom part of the bracket is attached to the computer with a screw; the top part of the bracket covers the screw and prevents its removal. The security bracket can be used with a padlock to inhibit access to the interior of the computer, which prevents unwanted configuration changes or component removal. For increased security, a cable lock can be installed to secure the computer to a fixed object. To install the security bracket, complete the following steps: Before installing the security bracket on a desktop computer, remove the thumbscrew or plastic pin from the screw hole in the center back of the computer. 1. Separate the pieces of the security bracket by bending the metal where the three pieces join. 2. Slide the tab on the narrow bracket into the notch on the back of the computer (center of desktop or upper-right corner of minitower), then slide the u-shaped bracket between the narrow bracket and the computer. 3. Position the bracket over the screw hole and secure the bracket with the screw provided. 4. Cover the screw with the flat portion of the security bracket. 5. Install a padlock (not provided) to secure the top part of the security bracket and inhibit access to the inside of the computer. Install a cable lock (not provided) to inhibit access to the interior of the computer and secure the computer to a fixed object. 2-22 Understanding and Using Intelligent Manageability