Compaq 270680-003 Compaq Reference Guide Deskpro 4000 and Deskpro 6000 Series - Page 99
Replace the expansion board cage., Repeat step 4 for any additional modules that you want
View all Compaq 270680-003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
4. Open both latches 1 of the DIMM socket, and insert the memory module 2 into the socket. Begin by installing a module into the socket nearest the preinstalled module, and install the modules following the numerical order of the sockets. A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. Push the module down into the socket, ensuring that the module is fully inserted and properly seated 3. Installing a DIMM Module 5. Repeat step 4 for any additional modules that you want to install. 6. Replace the expansion board cage. 7. Replace the computer cover. 8. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock. 9. Test the system (optional) using the Computer Checkup (TEST) utility. Refer to Chapter 8, "Using Compaq Utilities." Reference Guide 6-17