Compaq 270680-003 Compaq Reference Guide Deskpro 4000 and Deskpro 6000 Series - Page 164
Computer Checkup (TEST), From the Compaq Utilities menu, select Computer
View all Compaq 270680-003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Computer Checkup (TEST) Use Computer Checkup (TEST) in the following instances: s To determine if all devices are recognized by the system and functioning properly. Running TEST is optional, but recommended, after you install or connect a new device. s To save, print, or display the information generated by TEST. It is recommended that you run TEST and have the printed report available before placing a call to the Compaq Customer Support Center. s To assist your Compaq authorized dealer, reseller, or service provider in analyzing the system by allowing the service provider to reproduce the same environment on another computer for testing. To run Computer Checkup (TEST), complete the following steps: 1. Turn on only the external devices that you wish to test. You may wish to leave the printer connected to log error messages. 2. Access the Compaq Utilities menu. 3. From the Compaq Utilities menu, select Computer Checkup (TEST). 4. When the test option menu appears, select the option to view the device list. 5. Verify that TEST correctly detected the devices installed. This utility will detect all devices manufactured by Compaq; devices from other manufacturers may not be detected. t If the list is correct, select OK and go on to step 6. t If the list is incorrect, be sure that any new devices are installed properly. If you do not find an installation problem, call your Compaq authorized dealer, reseller, or service provider. 8-8 Using Compaq Utilities