Compaq 270680-003 Compaq Reference Guide Deskpro 4000 and Deskpro 6000 Series - Page 61

7. Select the monitor Manufacturer and Model. If your monitor does not appear in the list, proceed to steps 9 and 10. 8. Click OK. 9. Click Have Disk if your monitor does not appear in the list above, and you wish to install your monitor using an installation disk provided with your monitor. 10. Insert the manufacturer's installation disk into drive A and click the OK button.  To display driver information, click the Compaq tab, located in Display Properties. Matrox Performance and Matrox Millennium-II Graphics Controller Use the MGA Panel to select a monitor type, configure 3D accelerations, and obtain information about the Matrox graphics controller installed in your computer. To access the MGA Panel, double-click the MGA Panel icon, located in the Windows Control Panel. Monitor Tab Access the Monitor tab to select a monitor. Complete the following steps: 1. Click the Monitor tab in the MGA Panel. 2. If you have multiple graphics controllers or monitors installed, choose the Millennium-II board ID first, at the upper-right corner of the page. 3. Select the monitor controlled by the Millennium-II graphics controller. 4. Perform this procedure for each graphics controller that you have installed. 5. Click Save and restart your computer when prompted to do so. Reference Guide 3-3