Compaq 270680-003 Compaq Reference Guide Deskpro 4000 and Deskpro 6000 Series - Page 197

2. The appliance coupler (that is, the connector to the device itself, not the wall plug) must have a configuration for mating with a EN60 320 appliance inlet (Standard Sheet C14). 3. The length of the cord set must be as follows: t Minimum: 6.50 ft (2.0 m) t Maximum: 9.75 ft (3.0 m) U.S. and Canada 1. The cord set must be UL-Listed and CSA-Certified. 2. The minimum specifications for the flexible cord are: t No. 18 AWG t Type SJ t 3-conductor 3. The cord set must have a rated current capacity of at least 10 A. 4. The attachment plug must be an earth-grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration. Japan 1. All components of the cord set (cord, connector, and plug) must bear a "T" mark and registration number in accordance with the Japanese Dentori Law. 2. The minimum specifications for the flexible cord are: t 0.75 mm2 conductors t Type VCT or VCTF t 3-conductor 3. The cord set must have a minimum rated current capacity of 7 A. 4. The attachment plug must be a two-pole, grounded type with a Japanese Industrial Standard C8303 (15 A, 125 VAC) configuration. Reference Guide A-7