Compaq ML530R Service Guide - Page 142
HotPlug Fan, Table 4-7, Hot-Plug Fan Diagnostic LED Indicators
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Connectors, Switches, Jumpers, and LED Indicators 4-9 Hot-Plug Fan The hot-plug fan diagnostic LEDs indicate the condition of each fan in Compaq ProLiant ML530 servers. If the front panel fan status LED is amber, check the individual fan diagnostic LEDs to determine which fan has failed. The hot-plug fan diagnostic LEDs can be viewed by removing the access panel of the server. To remove the access panel, see "Access Panel" in Chapter 2. Figure 4-7 shows the location of the hot-plug fan diagnostic LEDs. Table 4-7 identifies the diagnostic LED and describes the condition of the fan. To replace a fan, see "Fans" in Chapter 2. The color of the status and diagnostic LEDs resets when the fan is replaced or system power is cycled. 2 1 Figure 4-7. Hot-plug fan diagnostic LED indicators Table 4-7 Hot-Plug Fan Diagnostic LED Indicators Item Description Status Condition System fans Green Fan operational Amber Fan failure-replace fan Off No power to fan Drive fans Green Fan operational Amber Fan failure-replace fan Off No power to fan Note: Fans may continue to spin after a temporary failure occurs. Replace failed fans (amber diagnostic LED) even if spinning continues.