Compaq ML530R Service Guide - Page 21
Rack Warnings, Server Warnings and Precautions - ml530 manual
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2-6 Compaq ProLiant ML530 Servers Maintenance and Service Guide Rack Warnings WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: The leveling jacks are extended to the floor. The full weight of the rack rests on the leveling jacks. The stabilizing feet are attached to the rack if it is a single-rack installation. The racks are coupled in multiple-rack installations. Only one component is extended at a time. A rack may become unstable if more than one component is extended for any reason. You are careful when pressing the component rail release latches and sliding the component into the rack. The slide rails could pinch your fingertips. You load the rack from the bottom up and load the heaviest item into the rack first. You do not attempt to move equipment racks without adequate assistance, due to their height and weight. You do not attempt to move an equipment rack on an incline that is greater than 10 degrees from the horizontal. You do not attempt to move a fully loaded equipment rack. Remove equipment from the rack before moving the rack. Server Warnings and Precautions WARNING: To reduce the risk of personal injury or damage to the equipment: Observe local health and safety requirements and guidelines for manual material handling. Obtain adequate assistance to lift and stabilize the product during installation or removal. The Compaq ProLiant ML530 server weighs at least 100 pounds (45 kilograms) when fully assembled. Remove all pluggable power supplies and modules to reduce the weight of the product. Make sure that the product is properly mated with the rails. Products that are improperly mated with the rails may be unstable.