Compaq ML530R Service Guide - Page 51
PCI Expansion Boards, Remove the PCI retainer. See
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2-36 Compaq ProLiant ML530 Servers Maintenance and Service Guide PCI Expansion Boards Compaq ProLiant ML530 servers include eight PCI expansion slots, as shown in Figure 2-27. To remove an expansion board: 1. Perform the preparation procedures. See "Powering Down the Server" earlier in this chapter. 2. Remove the access panel. See "Access Panel" earlier in this chapter. 3. Remove the PCI retainer. See "PCI Retainer" earlier in this section. NOTE: The system board tray must be completely in or completely out of the chassis to remove a full size expansion board. 4. Press the top of the expansion slot latch on the rear of the system board drawer and pull the latch , releasing the PCI expansion board or slot cover. 5. Remove the PCI expansion board or slot cover . 1 2 3 Figure 2-29. Removing a PCI expansion board Reverse steps 1 through 5 to replace a PCI expansion board.