Compaq ML530R Service Guide - Page 56
HotPlug Power Supplies, Table 2-8, Power Supply Bay Configuration
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Removal and Replacement Procedures 2-41 Hot-Plug Power Supplies Compaq ProLiant ML530 servers use a hot-plug 450-watt power supply. Only one power supply is required on a system having a single six-bay SCSI hard drive cage. The power supply must be located in the primary bay. A second power supply is considered redundant for a single hard drive cage configuration, but necessary for a two hard drive cage configuration. When two hard drive cages are used, a third power supply is supported as an option for redundancy. The location of the power supplies is shown in Figure 2-34 and described in Table 2-8. 3 2 1 Figure 2-34. Power supply bay configuration Table 2-8 Power Supply Bay Configuration Bay Description Primary hot-plug power supply Optional hot-plug power supply Redundant with one six-bay SCSI hard drive cage Necessary with two six-bay SCSI hard drive cages Optional hot-plug power supply (redundant for all configurations)