Compaq ML530R Service Guide - Page 83
Drives Disabled due, Array Accelerator is
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Diagnostics and Troubleshooting 3-23 Table 3-2 POST Error Messages continued Error Code Audible Beeps 1798-Drive Array - None Array Accelerator Write Error Occurred. Array Accelerator is disabled. 1799-Drive Array - None Drive(s) Disabled due to Array Accelerator Data Loss. Select "F1" to continue with logical drives disabled. Select "F2" to accept data loss and to re-enable logical drives. Beeps only 2 long Beeps only 2 long, 2 short (Run System None Configuration Utility - F10 key) (RESUME - F1 key) None Probable Source of Problem Hard parity error while writing data to posted-writes memory. Recommended Action Enable array accelerator. Volume failed due to loss of data in posted-writes memory. Press F1 to continue with logical drives disabled or F2 to accept data loss and re-enable logical drives. No valid memory is present in the system. Power is cycled. Temperature is too hot. Processor fan is not installed or spinning. A configuration error occurred during POST. Replace failed memory with valid memory. Check fans. Press F10 to run System Configuration Utility. As indicated to continue Press F1.