Compaq ML530R Service Guide - Page 25
Access Panel
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2-10 Compaq ProLiant ML530 Servers Maintenance and Service Guide Access Panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. CAUTION: Electrostatic discharge can damage electronic components. Be sure you are properly grounded before beginning any installation procedure. See "Electrostatic Discharge Information" earlier in this chapter. CAUTION: Leaving the access panel off the chassis will diminish the cooling capability and may adversely impact operation of the server. To remove the access panel: 1. Open the front bezel door (tower model only). 2. Loosen the two thumbscrews on the front of the chassis. 3. Loosen the T-15 security screw located on the front of the chassis. 4. Slide the access panel toward the back of the server, then lift it away from the chassis. 3 2 1 1 Figure 2-3. Removing the access panel Reverse steps 1 through 4 to replace the access panel.