Compaq ML530R Service Guide - Page 86
–299, Memory Test Error Codes, Table 3-4
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
3-26 Compaq ProLiant ML530 Servers Maintenance and Service Guide 200-299, Memory Test Error Codes The 200 series of diagnostic error codes identifies failures with the memory subsystem. Table 3-4 Memory Test Error Codes Error Code 200-xx 201-xx 202-xx Description Invalid memory configuration. Memory machine ID test failed. Memory system ROM checksum failed. 203-xx 204-xx 205-xx 206-xx 207-xx 208-xx 210-xx Memory write/read test failed. Memory address test failed. Walking I/O test failed. Increment pattern test failed. Invalid memory configuration - check DIMM installation. DIMMs installed have 8K refresh. Invalid memory speed detected - check DIMM installation. Slow DIMMs may cause data loss. Random pattern test failed. Recommended Action Reinsert memory modules in correct location and retest. 1. Replace the system ROM and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest. 1. Replace the memory module and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest. Replace DIMMs. Replace DIMMs with timing greater than 60 Ns. 1. Replace the memory module and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest.