Compaq ML530R Service Guide - Page 33
Drive Fan Cable and Cable Bracket, Hard Drive Cage - ml530 fan
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2-18 Compaq ProLiant ML530 Servers Maintenance and Service Guide Drive Fan Cable and Cable Bracket WARNING: To reduce the risk of personal injury or damage to the equipment, the installation of options other than hot-plug power devices should be performed only by individuals who are qualified in servicing computer equipment and trained to deal with products capable of producing hazardous energy levels. To remove the drive fan cable and cable bracket: 1. Perform the preparation procedures. See "Powering Down the Server" earlier in this chapter. 2. Remove the hot-plug drive fans. See "Hot-Plug Drive Fans" earlier in this section. 3. Remove the hard drive fan air baffle. See "Hard Drive Fan Air Baffle" earlier in this section. 4. Remove the hot-plug SCSI hard drives and hard drive cage. See "Hard Drive Cage with Backplane Board" later in this chapter. 5. Remove the T-10 screw securing the drive fan cable bracket in place, then lift the drive fan cable bracket from the chassis. 6. Unplug the drive fan cable from the power backplane board and remove it from the unit. Figure 2-11. Removing the drive fan cable and cable bracket Reverse steps 1 through 6 to replace the drive fan cable and cable bracket.