Compaq ML530R Service Guide - Page 71
I/O Fan Fan, Run Diagnostics. Replace failed
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Diagnostics and Troubleshooting 3-11 Table 3-2 POST Error Messages continued Error Code Audible Beeps 1610-Temperature violation detected. Waiting for system to cool 2 short 1611-Fan failure detected 2 short 1611-I/O Fan (Fan X) failure detected 2 short 1611-CPU Fan (Fan X) failure detected 2 short 1612-Primary power supply failure 2 short 1613-Low System None Battery 1615-Power Supply None Configuration Error 1615-Power Supply None Failure, Power Supply Unplugged, or Power Supply Fan Failure in Bay X 1617-Fan controller not responding 2 short 1617-I/O Fan controller not responding 2 short 1617-CPU Fan controller not responding 2 short 1618-PCI slots None powered down. Check PCI hot plug enabler connectors. 1620-Locked SCSI None Bus Detected. Verify SCSI bus cabling. System halted. 1621-Current SCSI None bus cable configuration is not recommended Probable Source of Problem Ambient system temperature is too hot. Recommended Action Check fan and system environment. Required fan is not installed or spinning. I/O fan has failed. CPU fan has failed. Check fans. Replace the failed fan. Replace the failed fan. Primary power supply has failed. Real time clock system battery is running low on power. Configuration requires an additional power supply. A power supply has failed. Replace power supply as soon as possible. Run Diagnostics. Replace failed assembly as indicated. Install an additional power supply. Check and replace specified power supply. Fan controller failure I/O fan controller failure Check and replace failed controller assembly. Check and replace failed controller assembly. CPU fan controller failure Check and replace failed controller assembly. PCI hot plug enabler is missing or Check and replace missing or failed. failed assembly. SCSI bus failure Run Diagnostics. Replace failed assembly as indicated. Improper SCSI bus cabling Check documentation for proper SCSI bus cabling. continued