Compaq ML530R Service Guide - Page 93

Diagnostics and Troubleshooting 3-33 1900-1999, Tape Drive Test Error Codes The 1900 series of diagnostic error codes identifies failures with tape cartridges, tape drives, tape drive cabling, adapter boards, or the system board assembly. Table 3-13 Tape Drive Test Error Codes Error Code 1900-xx 1901-xx 1902-xx 1903-xx 1904-xx 1905-xx 1906-xx Description Tape ID failed. Tape servo write failed. Tape format failed. Tape drive sensor test failed. Tape BOT/EOT test failed. Tape read test failed. Tape write/read/compare test failed. Recommended Action 1. Replace the tape cartridge and retest. 2. Check and/or replace the signal cable and retest. 3. Check the switch settings on the adapter board (if applicable). 4. Replace the tape adapter board (if applicable) and retest. 5. Replace the tape drive and retest. 6. Replace the system board and retest. 2400-2499, Advanced VGA Board Test Error Codes The 2400 series of diagnostic error codes identifies failures with video boards, monitors, or the system board assembly. Error Code 2402-xx 2403-xx 2404-xx 2405-xx 2406-xx 2407-xx 2408-xx 2409-xx Table 3-14 Advanced VGA Board Test Error Codes Description Video memory test failed. Video attribute test failed. Video character set test failed. Video 80 × 25 mode 9 × 14 character cell test failed. Video 80 × 25 mode 8 × 8 character cell test failed. Video 40 × 25 mode test failed. Video 320 × 320 mode color set 0 test failed. Video 320 × 320 mode color set 1 test failed. Recommended Action 1. Run the System Configuration Utility. 2. Replace the monitor and retest. 3. Replace the Advanced VGA board or other video board and retest. 4. Replace the system board and retest. continued