Compaq ML530R Service Guide - Page 73
Detected. If more, Drive Position
UPC - 720591250300
View all Compaq ML530R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Diagnostics and Troubleshooting 3-13 Table 3-2 POST Error Messages continued Error Code Audible Beeps 1721-Slot X Drive None Array - Drive parameter tracking predicts an imminent failure. The following devices should be replaced when conditions permit. Do not replace drive unless all other drives in the array are online. Back up data before replacing drive(s) if using RAID 0. 1724-Slot X Drive None Array - Physical Drive Position Change(s) Detected - Logical drive configuration has automatically been updated. 1726-Slot X Drive None Array - Array Accelerator Memory Size Change Detected 1727-Slot X Drive None Array - New Logical Drive(s) Attachment Detected. If more than 32 logical drives, this message will be followed by: Auto-configuration failed: Too many logical drives. Probable Source of Problem Monitor and performance threshold exceeded condition. Recommended Action Replace the drive when it is available. The drive has not failed, but replacement is recommended. Logical drive configuration has been updated automatically following physical drive position changes. Press F1 to resume. Indicates array accelerator configuration has been updated automatically due to replacement of array accelerator (or controller) with one having different memory size. Controller has detected an additional array of drives that was attached when the power was off. The logical drive configuration information has been updated to add the new logical drives. The maximum number of logical drives supported is 32. Additional logical drives will not be added to the configuration. Press F1 to resume. Press F1 to resume. continued