Compaq nx9010 Maintenance and Service Guide - Page 125
BIOS Setup Utility, Running the BIOS Setup Utility
View all Compaq nx9010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
BIOS Setup Utility The BIOS Setup utility provides access to the notebook's basic configuration settings It is independent of the operating system Running the BIOS Setup Utility 1. Close all applications, then restart the notebook: select Start > Turn Off Computer > Restart. (If necessary, you can press ctrl+alt+del to restart.) 2. When the HP logo appears, press F2 to enter the BIOS Setup utility. 3. The pointing devices are not active in BIOS Setup, so you will need to use the keyboard to navigate. Press the left and right arrow keys to move among menus. Press the up and down arrow keys to move among parameters in a menu. Press F5 or F6 to move through values for the current parameter, or press enter to change a setting. 4. After you select the options you want, press F10 or use the Exit menu to exit BIOS Setup. If the settings cause a conflict between devices during reboot, the system prompts you to run BIOS Setup, and marks the conflicting settings. NOTE: The listings in the following table are for the initial BIOS release and might differ somewhat for other models Service Manual Troubleshooting and Diagnostics 3-33