Compaq nx9010 Maintenance and Service Guide - Page 82

CAUTION, Wireless Models, Removing the Hard Disk Drive Guide

Get Compaq nx9010 - Notebook PC PDF manuals and user guides View all Compaq nx9010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

CAUTION: Wireless Models Be careful when removing and attaching antenna cables. Damage to cables or connectors can degrade performance. 3. Wireless models only: Remove the Mini PCI door, and then unplug the 2 antenna cables from the Mini PCI card. Do not remove the Mini PCI card at this time. 4. Remove the two M2.0×4.0mm screws that secure the PCMCIA assembly to the bottom case. 5. Remove the 4 screws that secure the hard disk drive guide to the bottom case. NOTE: The 4 screws that secure the hard disk drive guide are 2 different sizes. The screw in the upper left corner is a M2.5×6.0mm screw. The remaining 3 screws are M2.0×4.0mm screws. Make sure these screws are installed in the correct locations when reinstalling the hard disk drive guide. 6. Remove the hard disk drive guide. Figure 2-35. Removing the Hard Disk Drive Guide 2-52 Removal and Replacement Service Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
2-52
Removal and Replacement
Service Manual
CAUTION:
Wireless Models
Be careful when removing and attaching antenna cables. Damage to cables or connectors can
degrade performance.
3.
Wireless models only:
Remove the Mini PCI door, and then unplug the 2 antenna cables from
the Mini PCI card. Do not remove the Mini PCI card at this time.
4.
Remove the two M2.0×4.0mm screws that secure the PCMCIA assembly to the bottom case.
5.
Remove the 4 screws that secure the hard disk drive guide to the bottom case.
NOTE:
The 4 screws that secure the hard disk drive guide are 2 different sizes. The screw in the
upper left corner is a M2.5×6.0mm screw. The remaining 3 screws are M2.0×4.0mm screws. Make
sure these screws are installed in the correct locations when reinstalling the hard disk drive guide.
6.
Remove the hard disk drive guide.
Figure 2-35. Removing the Hard Disk Drive Guide