Compaq nx9010 Maintenance and Service Guide - Page 61
Required Equipment, Removal Procedure, Hard disk drive Keyboard cover
View all Compaq nx9010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
NOTE: This section applies only to HP Pavilion 5x00, HP Compaq nx9010 and nx9008, and Compaq Presario 2500 models. Required Equipment • 1 Phillips screwdriver Removal Procedure 1. Unplug the AC adapter, if present, and then remove the battery. 2. Remove these additional assemblies: • Hard disk drive (page 2-9) • Keyboard cover (page 2-13) • Keyboard (page 2-16) • Switchboard PCA (page 2-19) • Display assembly (page 2-23) • Top case (page 2-26) 3. Remove the insulating tape that secures the floppy drive flex cable to the TouchPad bracket on the top case. 4. Remove the four M2.5×6.0mm screws that secure the floppy drive and floppy drive bezel to the top case. 5. Remove the floppy drive. 6. Remove the M2.0×3.0mm screw that secures the floppy drive bezel to the floppy drive. 7. Remove the floppy drive bezel. Service Manual Removal and Replacement 2-31