Compaq nx9010 Maintenance and Service Guide - Page 45

Removing the Speaker Assembly - remove keyboard

Get Compaq nx9010 - Notebook PC PDF manuals and user guides View all Compaq nx9010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Removing the Speaker Assembly (User-Replaceable) NOTE: The following speaker assembly removal procedures apply only to HP Pavilion 4x00, HP Compaq nx9005 and nx9000, Compaq Evo Notebook N1050v and N1010v, and Compaq Presario 2100 and 1100 Series notebooks. The HP Pavilion ze5x00, HP Compaq nx9010 and nx9008, and Compaq Presario 2500 Series notebook speakers are integrated into the top case. Refer to the "Removing the Top Case" section later in this chapter for procedures on removing the top case and speakers on the HP Pavilion 5x00, HP Compaq nx9010 and nx9008, and Compaq Presario 2500 Series notebooks. Required Equipment 1 Phillips screwdriver Removal Procedure 1. Unplug the AC adapter, if present, and then remove the battery. 2. Remove the keyboard cover (page 2-13). 3. Remove the M2.5×6.0mm screw that secures the speaker assembly to the top case. 4. Disconnect the 4-wire cable from the switchboard PCA. Figure 2-11. Removing the Speaker Assembly Service Manual Removal and Replacement 2-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Service Manual
Removal and Replacement
2-15
Removing the Speaker Assembly
(User-Replaceable)
NOTE:
The following speaker assembly removal procedures apply only to HP Pavilion 4x00,
HP Compaq nx9005 and nx9000, Compaq Evo Notebook N1050v and N1010v, and
Compaq Presario 2100 and 1100 Series notebooks. The HP Pavilion ze5x00, HP Compaq nx9010
and nx9008, and Compaq Presario 2500 Series notebook speakers are integrated into the top case.
Refer to the “Removing the Top Case” section later in this chapter for procedures on removing the
top case and speakers on the HP Pavilion 5x00, HP Compaq nx9010 and nx9008, and Compaq Presario
2500 Series notebooks.
Required Equipment
1 Phillips screwdriver
Removal Procedure
1.
Unplug the AC adapter, if present, and then remove the battery.
2.
Remove the keyboard cover (page 2-13).
3.
Remove the M2.5×6.0mm screw that secures the speaker assembly to the top case.
4.
Disconnect the 4-wire cable from the switchboard PCA.
Figure 2-11. Removing the Speaker Assembly