Compaq nx9010 Maintenance and Service Guide - Page 68
Removing the Heat Sink with Fan, CAUTION, Reassembly Notes
View all Compaq nx9010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3. Remove the three M2.5×4.0mm retaining screws. 4. Lift up on the heat sink (with fan), and then disconnect the fan cable from the motherboard. Figure 2-26. Removing the Heat Sink (with Fan) HP Pavilion 4x00, HP Compaq nx9005 and nx9000, Compaq Evo Notebook N1050v and N1010v, and Compaq Presario 2100 and 1100 Models CAUTION: Do not spin the fan blades with your finger or you could damage the fan's bearings. Reassembly Notes • If the thermal pad is damaged, use a sharp knife or scraper to carefully remove it from the heat sink, and then attach a new thermal pad. • Install the heat sink screws in this order: 1. Install all 3 screws lightly. 2. Fully tighten the screws in the order marked on the heat sink. 2-38 Removal and Replacement Service Manual