D-Link DWC-2000-AP32-LIC User Manual - Page 113

Section 4 - Advanced WLAN Configuration Status (per-AP) AP MAC Location Status Firmware Version AP Firmware Status A table also appears and lists each AP, its download status, and the software version it is downloading. The status for an individual AP can have one of the following values: • Requested: A download is planned for this AP, but the AP is not in the current download group, so it hasn't been told to start the download yet. • Code‐Transfer‐In‐Progress: The AP has been told to download the code. • Failure: The AP reported a failing code download. • Aborted: The download was aborted before the AP loaded code from the TFTP server. • Waiting‐For‐APs‐To‐Download: A download finished on this AP, and it is waiting for other APs to finish download. Reset command is not sent to the AP in this state. • NVRAM‐Update‐In‐Progress: Download completed successfully. The reset command sent to the AP. • Timed‐Out: The AP did not reconnect to the controller in the fixed time interval. The managed AP MAC address. The location of the managed AP. Refer to Status (per-AP) above. The current firmware version of the managed AP. D-Link DWC-2000 User Manual 113