D-Link DWC-2000-AP32-LIC User Manual - Page 119

Section 5 - Advanced Network Configuration Field Status Mode Domain Name Server Preference DNS Servers Primary DNS Server Secondary DNS Server Lease/Rebind Time Prefix Delegation Description DHCPv6 Toggle On to enable DHCPv6. It is disable in default. If DHCPv6 is Enabled (ON) There are two ways to obtain an appropriate address for the gateway. You must select one of the following: • Stateless Address Auto Configuration: This option will use router advertisement for address assignment. The IPv6 RADVD protocol will be enabled to advertise this controller as a DHCPv6 client. • Stateful Address Auto Configuration: Select this option to request an IPv6 address from any available DHCPv6 servers available on the ISP. Name of the domain (Optional) for this DHCPv6 server. This is used by the stateless DHCP to indicate the preference level of this DHCP server. DHCPv6 clients will pick up the DHCPv6 server which has highest preference value. The preference value must be a decimal integer and be between 0 and 255 (inclusive). Select one of the following options for DNS servers for the DHCPv6 clients • Use DNS Proxy: On button to enable DNS proxy on this LAN, or Off this button to disable this proxy. When this feature is enabled, the controller will act as a proxy for all DNS requests and communicate with the ISP's DNS servers (as configured in the Option settings page) • Use DNS from ISP: This option allows the ISP to define the DNS servers (primary/ secondary) for the LAN DHCP client • Use below: if selected, the below configured Primary and Secondary DNS servers are used for DHCPv6 clients. Enter the primary DNS server address. Enter the secondary DNS server address. Duration (in seconds) for which IP addresses will be leased to clients. On/Off button for Enable/Disable Prefix Delegation. D-Link DWC-2000 User Manual 119