D-Link DWC-2000-AP32-LIC User Manual - Page 129
Link Aggregation
View all D-Link DWC-2000-AP32-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Section 5 - Advanced Network Configuration Link Aggregation Path: Network > LAN > Link Aggregation Link aggregation is used to combine a number of ports together to make a single high-bandwidth data pipeline. The controller treats all ports in a trunk group as a single port. Link Aggregation Control Protocol (LACP) is used to negotiate a dynamic aggregated link between the controller and another network device that supports 802.3ad. For this to work, the controllers must comply with LACP to allow negotiation of the aggregated link. 1. Click Network > LAN > Link Aggregation. 2. Click Add New LAC. The following window will appear. 3. Complete the fields in the table below and click Save. Field Name Static Mode Administrative Mode Member Ports Description Enter a name for this configuration. Activates or deactivates the Static Mode. Choices are: • ON = Use static mode. • OFF = Use dynamic mode (LACP). Enables or disables this configuration. • ON = Enabled • OFF = Disabled Select the ports to add to the configuration (ports 1-4). Hold CTRL and click for multiple ports. * Maximum four interfaces aggregate into one logical interface. D-Link DWC-2000 User Manual 129