D-Link DWC-2000-AP32-LIC User Manual - Page 239

Section 8 - Maintenance System Settings Set System Name Path: Maintenance > Administration > System Setting Enter a name for the system and click Save. Set System Date and Time Path: Maintenance > Administration > Date and Time You can configure your time zone, whether or not to adjust for Daylight Savings Time, and with which Network Time Protocol (NTP) server to synchronize the date and time. You can choose to set Date and Time manually, which will store the information on the controller's real time clock (RTC). If the controller has access to the internet, the most accurate mechanism to set the controller time is to enable NTP server communication. To configure the date and time, following below steps: 1. Select the controller's time zone, relative to Greenwich Mean Time (GMT). 2. If supported for your region, click to Enable Daylight Savings. 3. Determine whether to use default or custom Network Time Protocol (NTP) servers. If custom, enter the server addresses or FQDN. D-Link DWC-2000 User Manual 239