D-Link DWC-2000-AP32-LIC User Manual - Page 81

Section 4 - Advanced WLAN Configuration Manual Change Channel and Power of Managed AP Path: Wireless > Access Point > Managed APs List > Managed APs From the Managed AP page, you can also manually change the RF channel and power for each radio on an AP. The manual power and channel changes override the settings configured in the AP profile (including automatic channel selection) and take effect immediately. The manual channel and power assignments are not retained when the AP is reset or if the profile is reapplied to the AP, such as when the AP disassociates and re-associates with the controller. 1. Click Wireless > Access Point > Managed APs List > Managed APs tab. 2. Right-click on one of the entries and select Channel and Power. 3. Select the channel as your desired. The available channels depend on the radio mode and country in which the APs operate. The manual channel change overrides the channel configured in the AP profile and is not retained when the AP reboots or when the AP profile is reapplied. 4. Change the power as your desired. You can set a new power level for the AP. The manual power change overrides the power setting configured in the AP profile and is not retained when the AP reboots or when the AP profile is reapplied. 5. Click Save. D-Link DWC-2000 User Manual 81