D-Link DWC-2000-AP32-LIC User Manual - Page 45

Section 3 - Basic Configuration Step #8: Use SSID with RADIUS Sever as Authenticator To use SSID with RADIUS authentication, perform the following procedure. 1. Go to Security > External Auth Server > RADIUS Server. 2. Complete the fields below and click Save. Your access point will be configured to use RADIUS authentication server. 3. Click Server Checking to test the connection between the DWC-2000 and your RADIUS server. Field Description Server Checking Click to test the connection between the controller and your RADIUS server. Authentication Server IP Address IP address of your RADIUS authentication server. Authentication Port RADIUS authentication port number to send RADIUS messages. Secret Enter the secret key that allows the device to log into the configured RADIUS server. It must match the secret on RADIUS server. Timeout Set the timeout in seconds. The controller should wait for a response from the RADIUS server. Retries The number of tries the controller will make to the RADIUS server before giving up. D-Link DWC-2000 User Manual 45