D-Link DWC-2000-AP32-LIC User Manual - Page 79

Section 4 - Advanced WLAN Configuration Managed Mode Standalone Mode Rogue Mode Field MAC Address AP Mode Location Expected SSID Expected Channel Expected WDS Mode Expected Security Mode Expected Wired Network Mode Authentication Password Profile Radio Channel Power Description MAC address of the access point. Select standalone, managed, or rogue. Selecting standalone or managed will require you to fill out the fields (refer to the next page). • Standalone • Managed = access point profile configuration has been applied to the access point and the access point operating in managed mode. • Rogue = access point has not tried to contact the wireless controller and the access point's MAC address is not in the Valid AP database. Optional field to identify location of the access point being managed. If AP Mode= Standalone, the SSID that the access point should be set to. This is for reference only. If AP Mode= Standalone, the channel to be used for wireless communication. This is for reference only. If AP Mode= Standalone, the WDS (Wireless Distributed System) mode to be used if you intend to use WDS. This is for reference only. If AP Mode= Standalone, the security mode to be used. This is for reference only. If AP Mode= Standalone, select whether wired networking is going to be allowed. This is for reference only. If AP Mode= Managed, turn on to require a password for authentication. If AP Mode= Managed, select a profile to apply for AP configuration. If AP Mode= Managed, this is Wireless radio mode that the access point is using. The fields below appear after you have selected Managed AP Mode. If AP Mode= Managed, this is operating channel for the radio. If AP Mode= Managed, this is percentage of power to use for the radio. D-Link DWC-2000 User Manual 79