D-Link DWC-2000-AP32-LIC User Manual - Page 28

Section 3 - Basic Configuration Field Description MAC Address MAC address of the access point. AP Mode Select standalone, managed, or rogue. Selecting standalone will require you to fill out the fields below from Location to Expected Wired Network Mode. • Standalone • Managed = Access point profile configuration has been applied to the access point and the access point operating in managed mode. • Rogue = Access point has not tried to contact the wireless controller and the access point's MAC address is not in the Valid AP database. Location Optional field to identify location of the access point being managed. Expected SSID If AP Mode = Standalone, the SSID that the access point should be set to is displayed. This is for reference only. Expected Channel If AP Mode = Standalone, the channel to be used for wireless communication is displayed. This is for reference only. Expected WDS If AP Mode = Standalone, the WDS (Wireless Distributed System) mode to be used if you intend Mode to use WDS. This is for reference only. Expected Security Mode If AP Mode = Standalone, the security mode to be used is displayed. This is for reference only. Expected Wired If AP Mode = Standalone, select whether wired networking is going to be allowed. This is for Network Mode reference only. Authentication If AP Mode = Managed, turn on to require a password for authentication. Profile If AP Mode = Managed, select a profile to apply for AP configuration. Radio If AP Mode = Managed, this is Wireless radio mode that the access point is using is displayed. The fields below appear after you have selected Managed AP Mode. Channel If AP Mode = Managed, this is operating channel for the radio. Power If AP Mode = Managed, this is percentage of power to use for the radio. 4. Repeat steps 2 and 3 for each additional access point you want the wireless controller to manage. D-Link DWC-2000 User Manual 28