D-Link DWC-2000-AP32-LIC User Manual - Page 244
Configure SNMP Trap List
View all D-Link DWC-2000-AP32-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
Section 8 - Maintenance 2. Set the security level. • noAuthnoPriv: only requires a username match for authentication • authNoPriv: Provides authentication based on the MD5 or SHA algorithms. • authPriv: Provides authentication based on the MD5 or SHA algorithms as well as encryption privacy with the DES 256-bit standard. 3. Click Save. Configure SNMP Trap List 1. Go to Maintenance > Management > SNMP > SNMP Trap List tab. 2. Click Add SNMP Trap. 3. Complete the information on fields (refer to the table below). 4. Click Save. Field IP Address Port Community Authentication Type D-Link DWC-2000 User Manual Description The IP Address of the SNMP trap agent. The SNMP trap port of the IP address to which the trap messages will be sent. The community string to which the agent belongs. Most agents are configured to listen for traps in the Public community. The SNMP version used by the trap agent. The choices are v1, v2c, or v3. 244