D-Link DWC-2000-AP32-LIC User Manual - Page 235

Section 7 - Viewing Status and Statistics Viewing WDS AP Status Path: Status > Wireless Information > WDS Groups Status > WDS AP Status The WDS AP Group Status page displays summary information about the APs in a configured WDS group. Field Group ID AP MAC Address AP Connection Status Satellite Mode STP Root Mode Root Path Cost Ethernet Port STP State Ethernet Port Mode Ethernet Port Link State Description Use the drop-down menu above the fields to select the group number that identifies the configured WDS AP group. Identifies the AP in the group by its MAC address. Indicates whether the AP is currently being managed by one of the controllers in the cluster. Indicates whether the AP is a Satellite AP connected to the network via a WDS link or a Root AP connected to the network via a wired link. Indicates whether this AP is the root of the spanning tree. If spanning tree is disabled then the AP is always reported as Not STP Root. Spanning Tree Path Cost to the root. The root AP always reports this value as 0. If spanning tree is disabled the value is also 0. When spanning tree is enabled on the APs in the WDS group this status parameter reports the spanning tree status of the Ethernet port. On Satellite APs the Ethernet port can be manually disabled. On root APs the port is always enabled. When the Ethernet port is enabled, this status reports the link state of the port. D-Link DWC-2000 User Manual 235