Dell B2375dfw Dell Mono MFP User's Guide - Page 248

Setting the Printer ID In most countries, you are required by law to indicate your fax number on any fax you send. The printer ID, containing your telephone number and name or company name, will be printed at the top of each page sent from your printer. 1 Press My Settings Machine Setup Initial Setup Machine ID & Fax Number from the home screen. 2 Enter the Fax and ID field using the pop-up keyboard. Setting up the Fax System Changing the Fax Setup Options 1 Press My Settings Machine Setup Default Setting Fax Default from the home screen. 2 Select to find the status to enter the value for the option you have selected. Available Fax Defaults Options You can use the following setup options for configuring the fax system: Option Darkness Quality Original Type Original Size Duplex Description You can select the default darkness value to fax your documents (-5 ~ 5). You can select the default resolution setting to Standard, Fine, Super Fine. You can select the type of original you are faxing. This will give you a better fax. You can sets the image size. This function is especially intended for two-sided originals. You can select whether the machine sends the fax on one side or both sides of the paper. • 1 Sided: For originals that are printed on one side only. • 2->1 Side Long Edge: Scans both sides of the originals and prints each of them on a separate sheet. • 2->1 Side Short Edge: Scans both sides of the originals and prints each one on a separate sheet, but the information on the back side of the printout is rotate 180°. - 247 ­