Dell Brocade 6520 Web Tools Administrator's Guide Supporting Fabric OS v7.1.0 - Page 210
Changing the access control configuration, RADIUS management
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
15 RADIUS management 3. Select a user name from the User Name menu in the SNMPv3 section. NOTE The list is scrollable. If you do not see your user name, scroll down using the scroll bar or by clicking the User Name heading. 4. Double-click a recipient IP address in the SNMPv3 section and enter a new IP address. 5. Select a trap level from the Trap Level menu. 6. Optional: Select the Enable SNMPv3 Informs for all Trap Recipients check box to enable or disable inform requests for all trap recipients. 7. Enabling SNMPv3 informs allows you to enter the Engine ID. The Engine ID is required to authenticate the inform request. If informs request is disabled, the SNMP manager does not send a response to the sender. 8. Click Apply. Changing the access control configuration NOTE The port number is not included. To change the access control configuration, perform the following steps. 1. Open the Switch Administration window as described in "Opening the Switch Administration window" on page 31. 2. Select the SNMP tab. 3. Double-click an access host IP address in the Access Control List section and enter a new host IP address. You can enter an IP address in either IPv4 or IPv6 format. When you use the IPv6 format, you must include a prefix; for example, fec0::2002/64. NOTE The list is scrollable. If you do not see your user name, scroll down using the scroll bar or by clicking the Access Host heading. 4. Select a permission for the host from the Access Control List menu. Options are Read Only and Read Write. 5. Click Apply. RADIUS management Fabric OS supports RADIUS authentication, authorization, and accounting service (AAA). When configured for RADIUS, the switch becomes a Network Access Server (NAS) that acts as a RADIUS client. In this configuration, authentication records are stored in the RADIUS host server database. Login and logout account name, assigned role, and time accounting records are also stored on the RADIUS server. You should set up RADIUS through a secure connection such as SSH. 182 Web Tools Administrator's Guide 53-1002756-01