Dell External OEMR 2970 User Guide - Page 115
Example Command for omreport rac authentication, omreport rac dialinusers
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Example Command for omreport rac authentication When you type: omreport rac authentication the results that display show whether authentication of users for access to the RAC using the operating system user access definitions is disabled or enabled. For example: omreport rac authentication localauthenable=true omreport rac dialinusers Use the omreport rac dialinusers command to display the dial-in user property values. Table 6-2 displays the valid parameters for the command. Table 6-2. omreport rac dialinusers name=value pair username= index= Description Displays the dial-in user entry whose user name is specified by . Displays the dial-in user entry whose index is equal to n. The index is usually 0-15, and specifies one of the 16 user positions on the RAC. NOTE: The index number corresponds to a user position on the RAC. omreport rac dialoutusers The omreport rac dialoutusers command displays the demand dial-out user property values. Table 6-3 displays the valid parameters for the command. Table 6-3. omreport rac dialoutusers name=value pair ipaddr= index= Description Displays the demand dial-out user entry whose IP address is specified by . This address is the IP address that the RAC calls back after being contacted by a demand dial-out user. Displays the demand dial-out user entry whose index is equal to n. The index is usually 0 to 15 and specifies one of the 16 user positions on the RAC. NOTE: The index number corresponds to a user position on the RAC. omreport rac: Viewing Remote Access Controller Components 115