Dell External OEMR 2970 User Guide - Page 188
System Board Fan 1 RPM, Minimum Warning Threshold
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Save Command Results to a File That Can Be Overwritten Use the -outc option when you want to overwrite data that is stored in previously written files. For example, at 11:00 A.M. you capture fan probe RPM readings for fan probe 0 on your system and write the results to a file called fans.txt. You type: omreport chassis fans index=0 -outc fans.txt Partial results written to the file are: Index Status Probe Name Reading Minimum Warning Threshold Maximum Warning Threshold Minimum Failure Threshold Maximum Failure Threshold : 0 : OK : System Board Fan 1 RPM : 2380RPM : 600RPM : 5700RPM : 500RPM : 6000RPM Four hours later, you repeat the command. You have no interest in the 11:00 A.M. snapshot as written to fans.txt. You type the same command: omreport chassis fans index=0 -outc fans.txt The 3:00 P.M. data overwrites the 11:00 A.M. data in the fans.txt file. Fans.txt now reads as follows: Index Status Probe Name Reading Minimum Warning Threshold Maximum Warning Threshold Minimum Failure Threshold Maximum Failure Threshold : 0 : OK : System Board Fan 1 RPM : 3001RPM : 700RPM : 5500RPM : 500RPM : 6000RPM You cannot refer to the previous command results to compare the earlier fan probe 0 output with the present output because in using the -outc option, you overwrote the fans.txt file. 188 Working With CLI Command Results