Dell External OEMR 2970 User Guide - Page 174

Example for SAS Controllers: To unassign the physical disk described in this example as a global hot spare, enter: omconfig storage pdisk action=assignglobalhotspare controller=1 pdisk=0:2:3 assign=no omconfig Rebuild Physical Disk Use the following omconfig command syntax to rebuild a failed physical disk. Rebuilding a disk may take several hours. If you need to cancel the rebuild, use the Cancel Rebuild task. For more information, see the online help. Complete Syntax omconfig storage pdisk action=rebuild controller=id pdisk= where id is the controller ID. The variable specifies the physical disk. To obtain these values, enter omreport storage controller to display the controller IDs and then enter omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller. Example Syntax In this example, you want to rebuild physical disk 3 on connector 0 of controller 1. On a SAS controller, the physical disk resides in enclosure 2. Example for SCSI, SATA, and ATA Controllers: To rebuild the physical disk described in this example, enter: omconfig storage pdisk action=rebuild controller=1 pdisk=0:3 Example for SAS Controllers: To rebuild the physical disk described in this example, enter: omconfig storage pdisk action=rebuild controller=1 pdisk=0:2:3 omconfig Cancel Rebuild Physical Disk Use the following omconfig command syntax to cancel a rebuild that is in progress. If you cancel a rebuild, the virtual disk remains in a degraded state. See the online help for more information. Complete Syntax omconfig storage pdisk action=cancelrebuild controller=id pdisk= where id is the controller ID. The variable specifies the physical disk. To obtain these values, enter omreport storage controller to display the controller IDs and then enter omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller. 174 Using the Storage Management Service