Dell External OEMR 2970 User Guide - Page 166
omconfig Delete Virtual Disk, omconfig Format Virtual Disk, omconfig Reconfiguring Virtual Disks
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Example Syntax For example, to resume a check consistency on virtual disk 4 on controller 1, enter: omconfig storage vdisk action=resumecheckconsistency controller=1 vdisk=4 omconfig Delete Virtual Disk Use the following omconfig command syntax to delete a virtual disk. NOTICE: Deleting a virtual disk destroys all information including file systems and volumes residing on the virtual disk. You may receive a warning message if you attempt to delete the system or boot partition. However, this warning message is not generated in all circumstances. You should be certain that you are not deleting the system or boot partition or other vital data when using this command. Complete Syntax omconfig storage vdisk action=deletevdisk controller=id vdisk=id wwon=deletevdisk controller=1 vdisk=4 omconfig Format Virtual Disk Use the following omconfig command syntax to format a virtual disk. Complete Syntax omconfig storage vdisk action=format controller=id vdisk=id where id is the controller ID and virtual disk ID as reported by the omreport command. To obtain these values, enter omreport storage controller to display the controller IDs and then enter omreport storage vdisk controller=ID to display the IDs for the virtual disks attached to the controller. Example Syntax For example, to format virtual disk 4 on controller 1, enter: omconfig storage vdisk action=format controller=1 vdisk=4 omconfig Reconfiguring Virtual Disks You can reconfigure a virtual disk in order to change the virtual disk's RAID level or increase its size by adding physical disks. On some controllers, you can also remove physical disks. Complete Syntax omconfig storage vdisk action=reconfigure controller=id vdisk=id raid= size= pdisk= 166 Using the Storage Management Service