Dell External OEMR 2970 User Guide - Page 33

omreport chassis leds Use the omreport chassis leds command to find out whether clear hard drive fault is supported and what severity level lights up the LED. Type: omreport chassis leds index=n The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of LED information for chassis 0. If you specify the index, Server Administrator displays a summary for a specific chassis. The following is an example output: Flash chassis indentify LED state : Off Flash chassis indentify LED timeout value : 300 omreport chassis memory Use omreport chassis memory to see details for each memory module slot in your system. If your system supports redundant memory, this command also displays the status, state, and type of memory redundancy implemented on your system. Type: omreport chassis memory index=n The index parameter is optional. If you do not specify the index, Server Administrator displays information for all memory on your system. If you specify the index, Server Administrator displays a summary for a specific memory module. Output for an occupied memory slot may resemble the following: Index Status Connector Name Type Size : 1 : OK : DIMM_B : SDRAM-SYNCHRONOUS : 256 MB An unoccupied memory slot still has a connector name. Output for an unoccupied memory slot may resemble the following: Index Status Connector Name Type Size : 2 : Unknown : DIMM_D : Not Occupied : Unknown omreport: Viewing System Status Using the Instrumentation Service 33