Dell External OEMR 2970 User Guide - Page 147
omconfig Rescan Controller, preferable to use
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Table 8-16. omconfig Controller Commands (continued) Required Command Levels (1, 2, 3) Optional name=value pairs action=setcheckconsistency controller=id rate= action=exportlog controller=id action=importforeignconfig controller=id action=importrecoverforeignconfig controller=id action=clearforeignconfig controller=id action=setpatrolreadmode controller=id mode=manual | auto | disable action=startpatrolread controller=id action=stoppatrolread controller=id omconfig Rescan Controller Use the following omconfig command syntax to rescan a controller. See the online help for more information about using this command. Complete Syntax omconfig storage controller action=rescan controller=id where id is the controller ID as reported by the omreport storage controller command. Example Syntax For example, to rescan controller 1, enter: omconfig storage controller action=rescan controller=1 NOTE: The rescan controller is not supported on non-RAID SCSI and SAS controllers. You must reboot the system before Storage Management can see configuration changes on non-RAID SCSI controllers. omconfig Global Rescan Controller The omconfig storage controller action=globalrescan command was supported in previous releases of Storage Management. This command has been replaced by the omconfig storage globalinfo action= globalrescan command. When rescanning all controllers on the system and creating CLI scripts, it is preferable to use the omconfig storage globalinfo action=globalrescan command. See the online help for more information about using this command. Using the Storage Management Service 147