Dell External OEMR 2970 User Guide - Page 140

Table 8-7. omreport Connector Commands (continued) Required Command Levels (1, 2, 3) Optional name=value pairs Use controller=id where id is the controller number. For example: controller=0 connector=id where id is the connector number. For example: connector=0 Displays information for the specified connector on the controller. omreport Enclosure Status Table 8-8. omreport Enclosure Commands Required Command Levels (1, 2, 3) Optional name=value pairs Use omreport storage enclosure Displays property information for all enclosures attached to the system. controller=id enclosure= Displays the specified enclosure and its components. where id is the controller number and the enclosure number. For example: controller=0 enclosure=2 omreport Temperature Probe Status Table 8-9. omreport Temperature Probe Commands Required Command Levels (1, 2, 3) Optional name=value pairs Use and name=value pair omreport storage enclosure Displays property information for all enclosures attached to the system. controller=id enclosure= info=temps Displays the temperature probes for the specified enclosure. where id is the controller number and the enclosure number. For example: controller=0 enclosure=2 140 Using the Storage Management Service