Dell External OEMR 2970 User Guide - Page 54
Help With the omconfig Command, to get a list of the parameters
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Table 4-1. omconfig Command Level 1, Level 2, and Level 3 (continued) Command level 1 Command level 2 storage Command level 3 User privilege Use required memorymode A Enables or disables the spare bank and mirroring memory modes, and also specify which mode to use. remoteaccess A Configures remote access information. temps P, A Sets warning threshold values by default or value. NOTE: You cannot change threshold values on ESM3 and PowerEdge x8xx systems. volts P, A Sets warning threshold values by default or value. NOTE: You cannot change threshold values on ESM3 and PowerEdge x8xx systems. See "Using the Storage Management Service." Help With the omconfig Command Use the omconfig -? command to get a list of the available commands for omconfig. Use omconfig -? to get help on the level 2 commands about, chassis, preferences, and system. The following information on omconfig system -? applies equally to getting help for the omconfig chassis command. Use the omconfig system -? command to get a list of the available commands for omconfig system. Use the omconfig preferences -? command to get a list of the available commands for omconfig preferences, such as cdvformat, which is the custom delimiter format (cdv). Type the following command to display the list of delimiter values for the cdv: omconfig preferences cdvformat -? Use a command of the form omconfig system -? to get a list of the parameters you must use to execute a particular omconfig system command. For example, the following commands produce a list of valid parameters for omconfig system alertaction and omconfig system shutdown: omconfig system alertaction -? omconfig system shutdown -? In the case of the omconfig system alertaction command, you can use various options to prevent all of the CLI help from scrolling by before you can read it. 54 omconfig: Managing Components Using the Instrumentation Service