Dell External OEMR 2970 User Guide - Page 77
Enables DRAC NIC if DRAC 5 is
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Table 4-12. omconfig chassis remoteaccess (continued) name=value pair 1 config= config=nic (continued) name=value pair 2 Description ipsource=static | dhcp | systemsoftware static: Static if the IP address of the BMC LAN interface is a fixed, assigned IP address. dhcp: DHCP if the source of the IP address of the BMC LAN interface is the dynamic host configuration protocol. systemsoftware: System software if the source of the IP address of the BMC LAN interface is from the system software. NOTE: Not all commands may be supported on the system. nicselection=nic1 | teamednic1nic2 | dracnic nic1: Enables NIC 1. teamednic1nic2: Enables NIC teaming functionality. dracnic: Enables DRAC NIC if DRAC 5 is installed. NOTE: The option nicselection is supported only on PowerEdge x9xx systems. privilegelevel=administrator | operator administrator: Sets the maximum privilege | user level that can be accepted on a LAN channel to Administrator. operator: Sets the maximum privilege level that can be accepted on a LAN channel to Operator. user: Sets the maximum privilege level that can be accepted on a LAN channel to User. subnet=Subnet subnet: Sets a subnet mask if you have selected static as the IP address source for the BMC LAN interface. omconfig: Managing Components Using the Instrumentation Service 77