Dell External OEMR 2970 User Guide - Page 64
Baud rate of 115200 is supported on certain, systems that have a DRAC 5 installed.
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Table 4-3. omconfig chassis bmc (continued) name=value pair 1 config= config=serial name=value pair 2 Description baudrate=9600 | 19200 | 38400 |57600 9600: Sets connection speed to 9600 bits per | 115200 second. 19200:Sets connection speed to 19200 bits per second. 38400: Sets connection speed to 38400 bits per second. 57600: Sets connection speed to 57600 bits per second. 115200: Sets connection speed to 115200 bits per second. NOTE: Baud rates of 9600, 19200, 38400, and 57600 are supported on PowerEdge 1800,1850, 2800, and 2850 systems. Baud rates of 9600, 19200, and 57600 are supported on PowerEdge x9xx systems. Baud rate of 115200 is supported on certain systems that have a DRAC 5 installed. flowcontrol=none | rtscts none: No control over the flow of communication through the serial port. rtscts: RTS is ready to send and CTS is clear to send. 64 omconfig: Managing Components Using the Instrumentation Service