Dell External OEMR 2970 User Guide - Page 137

Table 8-2. Syntax For Name=Value Pairs For Parameters (continued) Syntax pdisk= battery=id < > [ ] | Description Indicates a particular physical disk by specifying either connector:targetID or connector:enclosureID:portID. To obtain the values for the connector, enclosure, and physical disk (targetID or portID), you would enter omreport storage controller to display the controller IDs and then enter omreport storage pdisk controller=id to display the IDs for the physical disks attached to the controller. Indicates the battery ID as reported by the omreport command. To obtain this value, enter omreport storage controller to display the controller IDs and then enter omreport storage battery controller=id to display the ID for the controller battery. The caret symbols (< >) enclose variable elements that you must specify. For example, the name= parameter might be specified as name= VirtualDisk1. The bracket symbols ([ ]) indicate optional elements that you can choose to specify or not. For example, when creating a virtual disk, the [name=] parameter indicates that you have the option of specifying the virtual disk name. If you omit this parameter from the syntax, then a default name for the virtual disk is chosen for you. The pipe symbol (|) separates two or more options from which one only must be selected. For example, when creating a virtual disk, the cachepolicy=d|c indicates that the cache policy must be specified as either cachepolicy=d or cachepolicy=c. User Privileges for omreport storage and omconfig storage Storage Management requires Administrator privileges to use the omconfig storage command. User and Power User privileges are sufficient to use the omreport storage command. omreport Command The following sections provide the omreport command syntax required to display the status of various storage components. Using the Storage Management Service 137