Dell External OEMR 2970 User Guide - Page 172

Example for SCSI, SATA, and ATA Controllers: To offline the physical disk described in this example, enter: omconfig storage pdisk action=offline controller=1 pdisk=0:3 Example for SAS Controllers: To offline the physical disk described in this example, enter: omconfig storage pdisk action=offline controller=1 pdisk=0:2:3 omconfig Online Physical Disk Use the following omconfig command syntax to bring an offline physical disk back online. Complete Syntax omconfig storage pdisk action=online controller=id pdisk= where id is the controller ID. The variable specifies the physical disk. To obtain these values, you would enter omreport storage controller to display the controller IDs and then enter omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller. Example Syntax In this example, you want to bring physical disk 3 on connector 0 of controller 1 back online. On a SAS controller, the physical disk resides in enclosure 2. Example for SCSI, SATA, and ATA Controllers: To bring the physical disk described in this example back online, enter: omconfig storage pdisk action=online controller=1 pdisk=0:3 Example for SAS Controllers: To bring the physical disk described in this example back online, enter: omconfig storage pdisk action=online controller=1 pdisk=0:2:3 omconfig Assign Global Hot Spare Use the following omconfig command syntax to assign a physical disk as a global hot spare. Complete Syntax omconfig storage pdisk action=assignglobalhotspare controller=id pdisk= assign=yes where id is the controller ID. The variable specifies the physical disk. 172 Using the Storage Management Service