Dell External OEMR 2970 User Guide - Page 143
omreport Physical Disk Status, Required Command Levels 1
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Table 8-12. omreport EMM Commands (continued) Required Command Levels (1, 2, 3) Optional name=value pairs Use and name=value pair controller=id enclosure= info=emms index=n Displays the specified EMMs. where id is the controller number and the enclosure number and "n" is the number of an EMM. For example: controller=0 enclosure=2 info=emms index=1 omreport Physical Disk Status Table 8-13. omreport Physical Disk Commands Required Command Levels (1, 2, 3) and Optional name=value pairs Use name=value pair omreport storage pdisk controller=id where id is the controller number. For example: controller=0 Displays all physical disks attached to the specified controller. connector=id where id is the connector number. For example: connector=1 Displays all physical disks attached to the specified connector on the controller. vdisk=id Displays all physical disks where id is the virtual disk included in the specified virtual number. For example: vdisk=1 disk on the controller. pdisk=connectorID : targetID Displays the specified physical | connectorID : enclosureID : disk on the specified connector slotID on the controller. where connectorID:targetID is the connector number and the physical disk number and connectorID:enclosureID:slotID is the connector number, enclosure number, and slot number. For example: pdisk=0:2 or pdisk=0:1:2 Using the Storage Management Service 143