Dell External OEMR 2970 User Guide - Page 190

The available formats include: • List (lst) • Semicolon-separated values (ssv) • Table (tbl) • Raw xml (xml) • Custom delimited format (cdv) Syntax for the formatting option is: -fmt For example, type: omreport system summary -fmt tbl where -fmt tbl specifies table format. You can combine the formatting option with the option to direct output to a file. For example, type: omreport system summary -fmt tbl -outa summary.txt where -fmt tbl specifies table format and -outa specifies that you append the command results to a file called summary.txt. List (lst) The default format is lst or list format. Use this format when you want to optimize output for simple readability. You need to specify a format for your command output only if you want a format other than lst format. To see the following example command output in lst format, type: omreport system summary No special formatting option is required because list format is the default display format. The network data part of the example system summary appears as follows: Network Data Network Interface Card 0 Data IP Address: 143.166.152.108 Subnet Mask: 255.255.255.0 Default Gateway: 143.166.152.1 MAC Address: 00-02-b3-23-d2-ca 190 Working With CLI Command Results