Dell External OEMR 2970 User Guide - Page 151
virtual disk. Different controllers support different RAID levels. See the online help for information
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
controller=id Parameter (Required) Specify the controller ID as reported by the omreport storage controller command. For example: controller=2 raid= Parameter (Required) Use the raid= parameter to specify concatenation or a RAID level for a virtual disk. Different controllers support different RAID levels. See the online help for information on the RAID levels a controller supports and for general information about RAID levels and concatenation. The following table indicates how to specify the raid=n parameter for each RAID level and concatenation. Table 8-17. Raid Level and Concatenation RAID Level or Concatenation RAID 0 RAID 1 RAID 5 RAID 10 RAID 50 RAID 1-concatenated Concatenation raid=n Parameter Specification raid=r0 raid=r1 raid=r5 raid=r10 raid=r50 raid=r1c raid=c size= Parameter (Required) The following table indicates how to specify the size= parameter. Table 8-18. Size Parameter size= Parameter Description Specification size= Use this specification to indicate a specific size for the virtual disk. The virtual disk size may be specified in b (bytes), m (megabytes), or g (gigabytes). For example, size=500m indicates that the virtual disk should be 500 MB. size=max To create a virtual disk that is the maximum size possible, specify size=max. When creating a RAID 50 virtual disk, this parameter must be specified as size=max. size=min To create a virtual disk that is the minimum size possible, specify size=min. Using the Storage Management Service 151