Dell External OEMR 2970 User Guide - Page 80
supported on PowerEdge
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Table 4-12. omconfig chassis remoteaccess (continued) name=value pair 1 config= config=serialoverlan config=settodefault config=terminalmode name=value pair 2 Description enable=true | false true: Enables serial over LAN for the BMC. false: Disables serial over LAN for the BMC. baudrate=9600 | 19200 | 38400 | 57600 9600: Sets the volatile and nonvolatile | 115200 connection speed to 9600 bits per second. 19200: Sets the volatile and nonvolatile connection speed to 19200 bits per second. 38400: Sets the volatile and nonvolatile connection speed to 38400 bits per second. 57600: Sets the volatile and nonvolatile connection speed to 57600 bits per second. 115200: Sets the volatile and nonvolatile connection speed to 115200 bits per second. NOTE: Baud rates of 9600 and 19200 are supported on PowerEdge 1800, 1850, 2800, and 2850 systems. Baud rates of 9600, 19200, and 57600 are supported on PowerEdge x9xx systems. Baud rate of 115200 is supported on certain systems that have a DRAC 5 installed. privilegelevel=administrator | operator administrator: Sets the maximum privilege | user level that can be accepted on a serial over LAN channel, to Administrator. operator: Sets the maximum privilege level that can be accepted on a serial over LAN channel, to Operator. user: Sets the maximum privilege level that can be accepted on a serial over LAN channel, to User. Takes the default configuration settings. deletecontrol=outputdel | outputbkspspbksp outputdel: BMC outputs a character when or is received. outputbkspspbksp: BMC outputs a character when or is received. 80 omconfig: Managing Components Using the Instrumentation Service