Dell External OEMR 2970 User Guide - Page 70
omconfig chassis currents, components, you can view both warning and failure threshold values
View all Dell External OEMR 2970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Table 4-4. omconfig chassis bmc config=user id= dracusergroup=custom name=value pair 1 config= config=user name=value pair 2 id=user id dracusergroup=custom Description logindrac= true | false configuredrac= true | false configure users= true | false clearlogs= true | false executeservercommands= true | false accessconsoleredir= true | false accessvirtualmedia= true | false testalerts= true | false omconfig chassis currents Use the omconfig chassis currents command to set amperage probe warning thresholds. As with other components, you can view both warning and failure threshold values, but you cannot set failure thresholds. Your system's manufacturer sets the minimum and maximum failure thresholds. NOTE: Settable thresholds vary from one system configuration to another. NOTE: Systems that contain embedded systems management 3 (ESM3) capabilities do not allow you to set warning threshold values to default values. Valid Parameters for Current Warning Thresholds Table 4-5 shows the valid parameters for setting current warning thresholds: NOTE: The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of status, readings, and thresholds set for all current probes present on your system. "Current probes are not present in all systems". If you specify the index, Server Administrator displays a summary for a specific current probe. Table 4-5. omconfig chassis currents name=value pair index= warnthresh=default minwarnthresh= maxwarnthresh= Description Number of the probe or probe index (must be specified). Sets minimum and maximum warning thresholds to default. Minimum warning threshold (3 decimal places). Maximum warning threshold (3 decimal places). 70 omconfig: Managing Components Using the Instrumentation Service